April 2017
4-23
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 3.3
Repairs and Adjustments
Launch Issue
REP 3.3 SD Card
Parts List on PL 3.10
Removal
WARNING
Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the upper rear cover, REP 28.5.
2. Remove the lower rear cover, REP 28.6.
3. Remove the RH top cover, PL 28.06 Item 2.
4. Remove the RH rear cover, PL 28.06 Item 3.
5. Remove one screw (1), then the SD card cover, Figure 1.
Figure 1 SD card cover removal
6. Remove the SD card, PL 3.10 Item 11.
Replacement
1. The replacement is the reverse of the removal procedure.
2. Reload the software, GP 4.
To Next Page
Loading...
Need help?
General
