April 2017
2-423
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
033-535, 033-536 to 033-540, 568, 575, 577
Status Indicator RAPs
Launch Issue
033-535 DCN Receive at Phase B Send RAP
033-535 Phase B instruction command (DCS/NSS/NSC/DTC) was rejected at the DCN.
Procedure
Perform the steps that follow:
1. Advise the customer to check the recipient’s address, folder information, etc. then repeat
the operation.
2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.
033-536 to 033-540, 568, 575, 577 Send/Receive Error RAP
033-536 The ringing stops before the resource was released.
033-537 A conflict between outgoing and incoming calls has occurred and the sending was
cancelled.
033-538 During the image processing of fax send, an error has occurred in the fax card.
033-539 During the image processing of fax receive, an error has occurred in the fax card.
033-540 During the image processing for fax print format, an error has occurred.
033-568 During fax communication, there was no response from the FCM for the specified
time.
033-575 Polarity inversion was detected.
033-577 An underrun has occurred at the modem.
Procedure
Perform the steps that follow:
1. Advise the customer to repeat the operation.
2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.
To Next Page
Loading...
Need help?
General
