April 2017
2-528
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
116-752, 116-771 to 116-780
Launch Issue
Status Indicator RAPs
116-752 Print Job Ticket RAP
116-752 The machine received a print job ticket sent together with a PDF but the job ticket data
includes printing instructions that are not supported by the machine.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Advise the customer to:
a. Re-run the job.
b. Print to a machine that supports the printing instructions.
2. Ensure that all connectors on the drive PWB, PL 1.10 Item 3 and the ESS PWB, PL 3.10
Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are
securely connected.
3. Reload the software, GP 4.
116-771 to 116-780 Invalid JBIG Parameter RAP
116-771 An incorrect JBIG parameter DL was automatically corrected.
116-772 An incorrect JBIG parameter D was detected and automatically corrected.
116-773 An incorrect JBIG parameter P was detected and automatically corrected.
116-774 An incorrect JBIG parameter YD was detected and automatically corrected.
116-775 An incorrect JBIG parameter L0 was detected and automatically corrected.
116-776 An incorrect JBIG parameter MX was detected and automatically corrected.
116-777 An incorrect JBIG parameter MY was detected and automatically corrected.
116-778 An incorrect JBIG parameter VLENGTH was detected and automatically corrected.
116-780 The system detected an error in the document attached to the E-mail to XXX
Procedure
For information only. No service action necessary.
To Next Page
Loading...
Need help?
General
