April 2017
2-322
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
024-934, 024-939
Launch Issue
Status Indicator RAPs
024-934 Paper Type Mismatch RAP
024-934 The fed paper is different from that specified in the controller (plain paper and heavy-
weight cannot be recognized).
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Load the specified media.
2. Ensure that all connectors on the drive PWB, PL 1.10 Item 3 and the ESS PWB, PL 3.10
Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are
securely connected.
3. Reload the software, GP 4.
024-939 OHP Type Mismatch RAP
024-939 Paper type mismatch. the system is shut down (stop) if transparencies with borders
are detected regardless of the paper type setting in the controller.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Check the UI settings, ensure that bypass tray is selected and the correct media used.
2. Ensure that all connectors on the drive PWB, PL 1.10 Item 3 and the ESS PWB, PL 3.10
Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are
securely connected.
3. Reload the software, GP 4.
To Next Page
Loading...
Need help?
General
