Xerox VersaLink B7030 Service Manual

April 2017
4-180
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 80.4
Launch Issue
Repairs and Adjustments
REP 80.4 1TM PWB
Parts List on PL 70.17
Removal
WARNING
Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Figure 1 ESD Symbol
CAUTION
Observe ESD procedures during this procedure.
1. Remove the rear cover, Figure 1:
a. Remove four screws (1).
b. Remove the rear cover (2).
Figure 2 Rear cover removal
2. Remove the 1TM PWB, Figure 2:
a. Disconnect five connectors (1).
b. Remove four screws (2).
c. Remove the 1TM PWB (3).
Figure 3 1TM PWB removal
Replacement
1. The replacement is the reverse of the removal procedure.
2. After installing a new 1TM PWB, change the value of NVM ID 742-205 to '0'.

Xerox VersaLink B7030 Specifications

General

Brand	Xerox
Model	VersaLink B7030
Category	All in One Printer
Language	English