April 2017
4-49
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 10.1
Repairs and Adjustments
Launch Issue
REP 10.1 Exit 1 OCT Assembly
Parts List on PL 10.10
Removal
NOTE: A video of this procedure is available on the EDOC. The video is accessible from the
Library menu on the Service Interface.
WARNING
Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the exit 2 transport assembly, refer to REP 10.2.
2. Remove the exit front cover, PL 28.05 Item 10.
3. Remove the fusing fan duct assembly, REP 10.4.
4. Move the bearing (1) toward the front, Figure 1.
Figure 1 Bearing
5. Remove the exit 1 OCT assembly toward the rear, Figure 2:
a. Disconnect the connector (1).
b. Remove three screws (2).
c. Remove the exit 1 OCT assembly (3) toward the rear.
Figure 2 Exit 1 OCT assembly removal
Replacement
The replacement is the reverse of the removal procedure.