April 2017
2-440
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
033-725, 033-742, 033-726, 728, 734, 737, 738, 751
Launch Issue
Status Indicator RAPs
033-725, 033-742 Insufficient Hard Disk Space RAP
033-725 The HD was full when fax was received, or when the format or report was created.
033-742 Timed out by page read close instruction (ran out of memory during manual send).
Procedure
Advise the customer to delete unnecessary data from the hard disk.
Procedure
Perform the steps that follow:
1. Advise the customer to delete unnecessary data from the hard disk.
2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.
033-726, 728, 734, 737, 738, 751 Fax Printing Error RAP
033-726 Two sided printing not available when receiving fax (mixed size).
033-728 Formatting for fax auto print was aborted because the instruction for fax manual print
was sent during the operation.
033-734 Job was cancelled because fax print and fax auto report were started at the same
time.
033-737 The fax cont detected a failure and could not continue processing the job.
033-738 The fax cont detected an error in JBIG data during coding/decoding of the JBIG data.
033-751 An activity report is generated during the time period where print is prohibited and
since the machine is in sleep mode, it started the process to place the report on hold.
Procedure
Perform the steps that follow:
1. For a single occurrence, take no action.
2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.
To Next Page
Loading...
Need help?
General
