April 2017
2-561
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
124-325, 124-326
Status Indicator RAPs
Launch Issue
124-325 Billing Restoration Fail RAP
124-325 Billing counter mismatch (1 position).
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Switch off, then switch on the machine, GP 10. The fault persists.
YN
Perform SCP 5 Final Actions.
Enter dC132 Device ID and Billing Data. All three product numbers are different.
YN
Install a new drive PWB, PL 1.10 Item 3 or ESS PWB, PL 3.10 Item 6 as necessary.
Install a new drive PWB, PL 1.10 Item 3, then a ESS PWB, PL 3.10 Item 6.
124-326 IOT Speed Not Registered RAP
124-326 IOT Speed not registered.
Procedure
Advise the customer to follow the instructions on the UI in order to enter the SW key for chang-
ing IOT speed.
To Next Page
Loading...
Need help?
General
