Xerox VersaLink B7030 Service Manual

April 2017
2-184
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016-721 to 016-724, 016-725
Launch Issue
Status Indicator RAPs
016-721 to 016-724 Settings Error RAP
016-721 Paper types cannot be determined because all the settings for custom paper priority
are set to disabled.
016-722 Staple position that is not supported by this machine or a paper size that is not sup-
ported by the Finisher was specified.
016-723 Punch position that is not supported by this machine or the paper size that is not sup-
ported by the Finisher was specified.
016-724 Job canceled due to invalid combination of staple and punch positions.
Procedure
Perform the steps that follow:
1. Advise the customer to correct the settings, then execute the command again.
2. If the fault persists, reload the software, GP 4.
016-725 B-Formatter Library Image Conversion Error RAP
016-725 An error has occurred in the B-Formatter during the image conversion of scanned
document to fax sending document.
Procedure
Perform the steps that follow:
1. Advise the customer to directly scan the document and send it to the fax recipient.
2. If the fault persists, reload the software, GP 4.

Xerox VersaLink B7030 Specifications

General

Brand	Xerox
Model	VersaLink B7030
Category	All in One Printer
Language	English