EasyManuals Logo
Home>Xerox>All in One Printer>VersaLink B7030

Xerox VersaLink B7030 Service Manual

Xerox VersaLink B7030
1341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #297 background imageLoading...
Page #297 background image
April 2017
2-277
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
018-764, 018-770
Status Indicator RAPs
Launch Issue
018-764 LDAP Protocol Errors 64 to 69 and 71 RAP
018-764 LDAP protocol error 64 at address book operation (naming violation).
018-765 LDAP protocol error 65 at address book operation (object class specification error).
018-766 LDAP protocol error 66 at address book operation (entries other than termination can-
not be executed).
018-767 LDAP protocol error 67 at Address Book operation (cannot be executed at RDN).
018-768 LDAP protocol error 68 at address book operation (the specified entry already exists).
018-769 LDAP protocol error 69 at address book operation (object class cannot be changed).
018-771 LDAP protocol error 71 at address book operation (influence on multiple DSA).
Procedure
Verify that print jobs are printing or print a configuration report and verify that network setup
settings are indicated.
The printer is operational or the configuration report indicates
valid network settings.
YN
Check for damage with the network connection. If there is no damage then there is a
problem with the network. Inform the customer that the network requires service.
There is a problem with the LDAP setups on the machine or with the remote LDAP server.
Advise the customer to verify the machine LDAP setups. If the check is good, there may be a
problem with the remote LDAP server.
018-770 LDAP Protocol Error 70 RAP
018-770 LDAP protocol error 70 at Address Book operation (search target is too large).
Procedure
Verify that print jobs are printing or print a configuration report and verify that network setup
settings are indicated.
The printer is operational or the configuration report indicates
valid network settings.
YN
Check for damage with the network connection. If there is no damage then there is a
problem with the network. Tell the customer that the network requires service.
Ask the customer to retry search with narrower search target by changing search condition/
search start position in Address Book internal data. If the check is OK, there may be a problem
with the remote LDAP server.

Table of Contents

Other manuals for Xerox VersaLink B7030

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox VersaLink B7030 and is the answer not in the manual?

Xerox VersaLink B7030 Specifications

General IconGeneral
BrandXerox
ModelVersaLink B7030
CategoryAll in One Printer
LanguageEnglish

Related product manuals