April 2017
4-106
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 13.16
Launch Issue
Repairs and Adjustments
REP 13.16 Finisher Stapler Assembly
Parts List on PL 13.20
Removal
WARNING
Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the creaser knife assembly, REP 13.18.
2. Remove the front cover assembly, REP 13.6.
3. Remove the stapler cover, Figure 1:
a. Remove the screw (1).
b. Remove the stapler cover (2).
Figure 1 Stapler cover removal
4. Remove the finisher stapler assembly, Figure 2:
a. Disconnect the connectors (1).
b. Remove three screws (2).
c. Remove the finisher stapler assembly (3).
Figure 2 Finisher stapler assembly removal
Replacement
1. The replacement is the reverse of the removal procedure.
2. Perform ADJ 13.2 Booklet Folding and Stapling Position.
To Next Page
Loading...
Need help?
General
