April 2017
4-221
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 90.4, REP 90.5
Repairs and Adjustments
Launch Issue
REP 90.4 Drum Cartridge
Parts List on PL 90.20
Removal
CAUTION
To prevent light fatigue, either wrap the removed drum cartridge in a sheet of black paper or
store it in a black bag.
CAUTION
Do not touch the surface of the drum.
1. Open the front cover.
2. Open the LH transport assembly, PL 80.45 Item 1.
3. Raise the latch (1), then remove the drum cartridge, Figure 1.
Figure 1 Drum cartridge removal
Replacement
The replacement is the reverse of the removal procedure.
REP 90.5 Reclaim Pipe Assembly
Parts List on PL 90.20
Removal
WARNING
Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the drum cartridge, REP 90.4.
2. Remove the front cover, REP 28.1.
3. Remove the inner cover, REP 28.2.
4. Remove the print head assembly, REP 60.8.
5. Remove the AC housing assembly, REP 90.6.
6. Remove the dispenser pipe unit, REP 90.1.
7. Remove the reclaim pipe assembly, Figure 1:
a. Remove two screws (1).
b. Remove the reclaim pipe assembly (2).
Figure 1 Reclaim pipe assembly removal
Replacement
The replacement is the reverse of the removal procedure.
To Next Page
Loading...
Need help?
General
