April 2017
4-58
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 12.2
Launch Issue
Repairs and Adjustments
10. Remove the paddle belt, Figure 8:
a. Remove two E-clips (1).
b. Move the two bearings (2) in the direction of the arrow.
c. Remove the sub paddle shaft assembly (3).
d. Remove the rear paddle belt (4).
Figure 8 Rear paddle belt removal
Replacement
1. The replacement is the reverse of the removal procedure.
2. Install the paddle link assembly (1) as shown in Figure 9.
Figure 9 Paddle link assembly installation
To Next Page
Loading...
Need help?
General
