7.2.5 Utility—File—Message File Transfer PC to PBX
Transfers Outgoing Message (OGM) files from the PC to the System Memory.
This option is only available at Installer level when programming in On-line mode.
Uploaded files are automatically renamed as necessary. If the location specified already contains an OGM, it
will be overwritten by the newly uploaded message.
To transfer OGMs to the System Memory
1. From the Utility menu, select Message File Transfer PC to PBX.
2. Select the destination to transfer the OGM files to from the drop-down list, and then click Browse.
The Open dialogue box will be displayed.
3. Select the message files to upload. The files must be in the WAV format.
It is possible to select multiple files.
Note
• When selecting files to copy to the PBX, the file names (apart from the file extension) cannot be
more than 33 characters in length.
• When selecting G.711 codec WAV files to copy to the PBX, the total file size of all selected files
combined cannot exceed 32 megabytes.
4. Click OK.
• The files will be uploaded. Files that do not contain message data will be ignored.
• An index number (01 to 64) will be appended automatically to the file names of message files
transferred to the PBX.
• When complete, the display will return to the main screen.
106 PC Programming Manual
7.2.5 Utility—File—Message File Transfer PC to PBX
To Next Page
Loading...
Need help?
General
