27.2.5 Network Service—[2-6] Server Feature—SMTP
Settings for SMTP for sending e-mail for PBX functions can be programmed.
Mail sending—Mail sender information name
Specifies the name to be used as the sender of the e-mails from the PBX.
Value Range
Max. 64 characters
Maintenance Console Location
27.2.5 Network Service—[2-6] Server Feature—SMTP
Mail sending—Mail address
Specifies the sending e-mail address for messages sent from the PBX. This address, for example, could be
set as the e-mail address of an administrator.
Value Range
Max. 128 characters
Maintenance Console Location
27.2.5 Network Service—[2-6] Server Feature—SMTP
SMTP server for relay—SMTP server address
Specifies the IP address or host name of the SMTP server to be used to send e-mails.
Value Range
1.0.0.0–223.255.255.255 (IP address), Max. 128 characters (host name)
Maintenance Console Location
27.2.5 Network Service—[2-6] Server Feature—SMTP
SMTP server for relay—SMTP server Port number
Specifies the port number of the SMTP server to be used to send e-mails.
Value Range
25, 465, 587, 1024–65535
Maintenance Console Location
27.2.5 Network Service—[2-6] Server Feature—SMTP
SMTP server for relay—SMTP over TLS
Specifies whether the SMTP server uses Transport Layer Security.
PC Programming Manual 991
27.2.5 Network Service—[2-6] Server Feature—SMTP
To Next Page
Loading...
Need help?
General
