Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Optional Device & Other
Extensions— Remote Operation by Other Extension
Feature Guide References
2.7.5 Walking COS
2.7.6 Verification Code Entry
Wireless XDP Parallel Mode Set / Cancel
Specifies the feature number used to set or cancel Wireless XDP Parallel mode.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Optional Device & Other
Extensions—
Accept Wireless XDP Parallel Mode Set by PS
Feature Guide References
5.2.4.5 Wireless XDP Parallel Mode
Account Code Entry
Specifies the feature number used to enter an Account Code.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
Feature Guide References
2.5.4.3 Account Code Entry
Call Hold / Call Hold Retrieve
Specifies the feature number used to hold a call or retrieve a call on hold from the holding extension.
468 PC Programming Manual
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
To Next Page
Loading...
Need help?
General
