11.9 PBX Configuration—[3-9] Group—Conference
Group
A conference group is a group of telephones (extensions or outside destinations) that ring when a conference
group call is made. One destination number can be assigned to multiple conference groups. Up to 31 members
can be assigned to each of 8 conference groups. To assign members to a group, click Member List.
When Broadcast Mode is set to "Disable", only up to 7 members can be assigned to a group. All of these
members are automatically allowed to speak when the call starts.
Conference Group Name
Specifies the name of the conference group.
Value Range
Max. 20 characters
Maintenance Console Location
11.9 PBX Configuration—[3-9] Group—Conference Group
Feature Guide References
2.15.1 Conference Group Call
Broadcast Mode
Specifies whether only the original caller can speak or up to 8 people can speak at the start of a conference
group call.
Value Range
Disable: The original caller and up to 7 participants can speak at the start of a conference group call.
Enable: Only the original caller can speak at the start of a conference group call.
Maintenance Console Location
11.9 PBX Configuration—[3-9] Group—Conference Group
Feature Guide References
2.15.1 Conference Group Call
Ability to Talk
Enables PT, SLT and PS users to use the push-to-talk feature during a conference group call, when
Broadcast Mode is set to "Enable". The push-to-talk feature allows PT, SLT and PS users to speak during
the call by pressing any of their dial keys.
Value Range
Disable, Enable
PC Programming Manual 609
11.9 PBX Configuration—[3-9] Group—Conference Group
To Next Page
Loading...
Need help?
General
