23.3.1 UM Configuration—[4-3] Service Settings—Custom
Service—Menu & Transfer
The below parameters are set for the Menu Transfer Custom Service in the Custom Service Builder.
This Custom Service type guides callers to press certain buttons to connect themselves with the designated
party. The prompt for this service can be recorded in the CS No. dialogue box.
Custom Service prompts can be recorded only in On-line mode.
Description
The information typed in this field is for reference only.
Value Range
Max. 32 characters
Maintenance Console Location
23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer
Feature Guide References
3.2.1.15 Custom Service
Prompt Mode
Specifies the language for prompts used by this Custom Service.
Note
• This parameter overrides a set "Incoming Call Service Prompt".
• If "Primary" is selected, the default language which is selected from all installed languages will be used.
• If "None" is selected, the prompt mode of previous process will be continued, or "Primary" language
will be selected.
Value Range
None, Primary, Guidance No. 1-8
Maintenance Console Location
23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer
PC Programming Manual References
22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group—
Day, Night, Lunch, and
Break Mode - Incoming Call Service Prompt
Feature Guide References
3.2.1.15 Custom Service
924 PC Programming Manual
23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer
To Next Page
Loading...
Need help?
General
