Feature Guide References
2.2.2.4 Queuing Feature
Queuing Time Table
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
Group Name
Specifies the name of the incoming call distribution group.
Value Range
Max. 20 characters
Maintenance Console Location
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
Queuing Time Table—Day, Lunch, Break, Night
Specifies the Queuing Time Table to be used in each time mode.
Value Range
None, Table 1–Table 64
Maintenance Console Location
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
PC Programming Manual References
10.4 PBX Configuration—[2-4] System—Week Table
Feature Guide References
2.2.2.4 Queuing Feature
Queuing Time Table When Extension Ringing
Enables the PBX to play messages/BGM to the caller according to the Queuing Time Table, when the call
arrives at an extension without being queued or after being queued.
PC Programming Manual 585
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
To Next Page
Loading...
Need help?
General
