14.1 PBX Configuration—[6-1] Feature—System
Speed Dial
The System Speed Dialling Table is used to store frequently dialled numbers as well as callers who should be
automatically routed to certain extensions when they call (Calling Line Identification [CLI] distribution). The
System Speed Dialling Table is available for all extension users when making or receiving a call.
In Basic Memory, a maximum of 1000 System Speed Dialling numbers (e.g., telephone numbers, feature
numbers) can be programmed with other related parameters. 100 numbers are displayed at a time. To display
other sets of numbers, click the applicable tab.
Select Table
Selects the System Speed Dialling Table to be programmed. Whether a tenant uses the basic System Speed
Dialling Table or the additional table depends on the setting of
System Speed Dial in 14.6 PBX
Configuration—[6-6] Feature—Tenant.
Value Range
System: the standard table
Expansion for Tenant 1-8: additional tables
Maintenance Console Location
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
PC Programming Manual References
14.6 PBX Configuration—[6-6] Feature—Tenant— System Speed Dial
Feature Guide References
2.6.4 Speed Dialling—Personal/System
2.19.1 Caller ID
5.1.3 Tenant Service
Name
Specifies a name for the System Speed Dialling number.
Value Range
Max. 20 characters
Maintenance Console Location
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
Feature Guide References
2.6.4 Speed Dialling—Personal/System
2.19.1 Caller ID
760 PC Programming Manual
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
To Next Page
Loading...
Need help?
General
