11.8 PBX Configuration—[3-8] Group—PS Ring
Group
A PS ring group is a group of PS extensions that receives incoming calls. Each group has a floating extension
number and name. One PS can belong to multiple PS ring groups. A maximum of 32 PS ring groups can be
programmed, each containing up to 128 PS extensions.
To add PSs to the PS Ring Group, click Member List.
Floating Extension Number
Specifies the floating extension number of the PS ring group.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
11.8 PBX Configuration—[3-8] Group—PS Ring Group
Feature Guide References
5.2.4.2 PS Ring Group
Group Name
Specifies the name of the PS ring group, which will be shown on the display of extensions that call the PS ring
group when Incoming Trunk Call Information Display on this screen is set to Called Number.
Value Range
Max. 20 characters
Maintenance Console Location
11.8 PBX Configuration—[3-8] Group—PS Ring Group
Feature Guide References
5.2.4.2 PS Ring Group
Incoming Trunk Call Information Display
Specifies the information of the incoming trunk call to be shown on the displays of the PSs that belong to the
PS ring group. If the caller’s name or called party’s name is not recognised, the telephone number will be
shown.
Value Range
Caller ID, Called Number
Maintenance Console Location
11.8 PBX Configuration—[3-8] Group—PS Ring Group
606 PC Programming Manual
11.8 PBX Configuration—[3-8] Group—PS Ring Group
To Next Page
Loading...
Need help?
General
