Panasonic KX-NS500 Pc Programming Manual

6.8 Tool—UM Data Backup
The UM Data Backup tool can be used to backup and restore Unified Messaging (UM) data.
This screen can be accessed only in On-line mode.
The following voice data can be backed up or restored as individual files. The data can be backed up to a USB
memory device connected to the PBX or a NAS.
a. System Prompts
– Installed Prompts
– Custom Service Menu
– Company Name
– Company Greetings
– System Mailbox Group Voice Label
– System Caller Name
– Prompt Selection
– Hold Announce Menu
b. Mailbox Prompts
– Owner Name
– Personal Greetings
– Personal Caller ID Name
– Interview
– Personal Group List Name
– EMD List Member Name
c. Mailbox Messages
Note
Mailbox data may not be backed up if the mailbox is in use during the backup process. Additionally, Unified
Messaging system response time may be affected when backing up data. For these reasons, we
recommend backing up data when the Unified Messaging system is not in use.
The UM Data Backup tool can be executed manually or scheduled to run automatically at regular intervals.
Refer to the following:
• 6.8.1 Tool—UM Data Backup—Manual Backup
• 6.8.2 Tool—UM Data Backup—Scheduled Backup
88 PC Programming Manual
6.8 Tool—UM Data Backup

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm