10.1.2 PBX Configuration—[2-1-2] System—Date & Time—SNTP /
Daylight Saving
Automatic clock adjustment and Summer time (daylight saving time) settings of the PBX can be programmed.
Automatic clock adjustment can be performed using one of two methods, ISDN & Caller ID or SNTP (Simple
Network Time Protocol).
To set Summer time, click 10.1.2.1 PBX Configuration—[2-1-2] System—Date & Time—SNTP / Daylight
Saving—Daylight Saving.
Note
The NTP server function of the PBX must be enabled for connected KX-UT series SIP phones to receive
automatic time adjustment information from the PBX. See 27.2.4 Network Service—[2-5] Server
Feature—NTP.
Automatic Time Adjustment
Enables the PBX to automatically adjust its clock every day according to the time information provided by the
network.
Value Range
Disable, ISDN & Caller ID (FSK), SNTP
Maintenance Console Location
10.1.2 PBX Configuration—[2-1-2] System—Date & Time—SNTP / Daylight Saving
Feature Guide References
5.5.5 Automatic Setup
SNTP—SNTP Server—IP Address
Specifies the IP address or host name of the SNTP server.
Value Range
1.0.0.0–223.255.255.255 (IP address), Max. 253 characters (host name)
Maintenance Console Location
10.1.2 PBX Configuration—[2-1-2] System—Date & Time—SNTP / Daylight Saving
Feature Guide References
5.5.5 Automatic Setup
SNTP—SNTP Server—Port Number
Indicates the port number used for communication with an SNTP server (reference only).
Value Range
1–65535
PC Programming Manual 429
10.1.2 PBX Configuration—[2-1-2] System—Date & Time—SNTP / Daylight Saving
To Next Page
Loading...
Need help?
General
