14.6 PBX Configuration—[6-6] Feature—Tenant
A maximum of 8 tenants can share the PBX. Each tenant is composed of specified extension user groups.
The PBX offers each tenant its own Time Table and system resources.
To assign extensions as operators easily, click Extension No. Setting (see 2.1.6 Extension Number
Setting).
Music On Hold
Specifies the audio source to be used for Music on Hold.
Value Range
Same as System Setting, BGM1, BGM2, BGM3, BGM4, BGM5, BGM6, BGM7, BGM8, Tone
Maintenance Console Location
14.6 PBX Configuration—[6-6] Feature—Tenant
PC Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM
Feature Guide References
2.13.4 Music on Hold
5.1.3 Tenant Service
Operator (Extension Number)
Specifies the extension number or the floating extension number of an incoming call distribution group to be
designated as the tenant operator. When this parameter is left unspecified, the PBX operator serves as the
tenant operator.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
14.6 PBX Configuration—[6-6] Feature—Tenant
PC Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM
Feature Guide References
5.1.3 Tenant Service
5.1.5 Operator Features
ARS Mode
Specifies the ARS mode used when making a trunk call.
776 PC Programming Manual
14.6 PBX Configuration—[6-6] Feature—Tenant
To Next Page
Loading...
Need help?
General
