EasyManuals Logo

Panasonic KX-NS500 Pc Programming Manual

Panasonic KX-NS500
1064 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #721 background imageLoading...
Page #721 background image
12.2.4 PBX Configuration—[4-2-4] Extension—Portable
Station—NDSS Link Data - Send
It is possible to cancel the transmission of an extension’s status data over the network. Select the desired
extension from the Extension Number / Name list.
This screen can be accessed only in On-line mode.
Network BLF Data to NDSS Key of Other PBX - Other PBX (Network PBX ID=1)
Selects whether extension status data is transmitted over the network for the selected extension. This setting
is automatically set to ON when the feature is used, and can only be manually changed from ON to OFF, to
cancel data transmission.
Value Range
OFF, ON
Maintenance Console Location
12.2.4 PBX Configuration—[4-2-4] Extension—Portable Station—NDSS Link Data - Send
PC Programming Manual References
17.4 PBX Configuration—[9-4] Private Network—NDSS Key Table
Feature Guide References
4.2.5.1 Network Direct Station Selection (NDSS)
PC Programming Manual 721
12.2.4 PBX Configuration—[4-2-4] Extension—Portable Station—NDSS Link Data - Send

Table of Contents

Other manuals for Panasonic KX-NS500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic KX-NS500 and is the answer not in the manual?

Panasonic KX-NS500 Specifications

General IconGeneral
Analog ExtensionsUp to 64
VoIP SupportYes
System TypeHybrid IP-PBX
Power SupplyAC 100-240V, 50/60Hz
Operating Temperature0°C to 40°C
Humidity10% to 90% (non-condensing)
Maximum Extensions288
IP Extensions128
VoIP Channels64
SIP Trunks64
NetworkingYes, supports networking
Built-in ApplicationsCall Center
ExpandabilityYes, via expansion cards and cabinets
Supported ProtocolsSIP, H.323, MGCP
Dimensions430 x 88 x 367 mm

Related product manuals