9.4 PBX Configuration—[1-1]
Configuration—Slot—VoIP Property
9.4.1 PBX Configuration—[1-1] Configuration—Slot—VoIP
Property—VoIP (Ext) Setting
Allows you to install or remove IP extension cards by entering the number of IP extensions (IP-PT, UT/UDT
or SIP extension) and to set IP Terminal Registration Mode.
When you place the mouse cursor over the VoIP Property button on the Slot screen, click the VoIP(Ext)
Setting button to open the VoIP(Ext) Setting screen.
Number of IP Extensions—Number of IP Extensions (Max.128) - IP-PT(NT)
Specifies the required number of IP-PT(NT) extensions to install or remove V-IPEXT32 cards.
Value Range
0-128
Maintenance Console Location
9.4.1 PBX Configuration—[1-1] Configuration—Slot—VoIP Property—VoIP (Ext) Setting
Number of IP Extensions—Number of IP Extensions (Max.128)—UT/UDT
Specifies the required number of UT/UDT extensions to install or remove V-UTEXT32 cards.
Value Range
0-128
Maintenance Console Location
9.4.1 PBX Configuration—[1-1] Configuration—Slot—VoIP Property—VoIP (Ext) Setting
Number of IP Extensions—Number of IP Extensions (Max.128)—SIP-Phone
Specifies the required number of SIP extensions to install or remove V-SIPEXT32 cards.
Value Range
0-128
Maintenance Console Location
9.4.1 PBX Configuration—[1-1] Configuration—Slot—VoIP Property—VoIP (Ext) Setting
Number of IP Extensions—Number of IP Extensions (Max.128)—Total
Indicates the total number of required IP Extensions (IP-PT(NT), UT/UDT, SIP Phone) (reference only).
232 PC Programming Manual
9.4.1 PBX Configuration—[1-1] Configuration—Slot—VoIP Property—VoIP (Ext) Setting
To Next Page
Loading...
Need help?
General
