7.7 Utility—Email Notification
7.7.1 Utility—Email Notification—Alert
You can specify e-mail addresses that will receive messages regarding the PBX’s status.
System Alarm
An e-mail message will be sent to the specified address when there is a system alarm. The e-mail message
will contain details about the alarm.
1. For Filtering Setting, select the check boxes to specify whether to receive e-mails when there is a Major
alarm, a Minor alarm, or both.
2. Specify one or two e-mail addresses that will receive system alarm alert messages.
Notice
Be sure to enter e-mail addresses correctly. If an address is incorrectly entered, an alert will not be
received when there is a system alarm, or information regarding the PBX may be sent unintentionally
to a third party.
3. In Subject enter the text that will be used for the subject header of e-mails that are sent.
4. Click OK when finished.
Licence Expiry
When activation keys that are registered to the PBX and have a limited duration are about to expire, an e-mail
message can be sent to the specified addresses. When 10 days remain in the duration of a registered activation
key, the e-mail will be sent.
1. Specify one or two e-mail addresses that will receive expiry notice messages.
Notice
Be sure to enter e-mail addresses correctly. If an address is incorrectly entered, an alert will not be
received when activation keys are about to expire, or information regarding the PBX may be sent
unintentionally to a third party.
2. In Subject enter the text that will be used for the subject header of e-mails that are sent.
3. Click OK when finished.
128 PC Programming Manual
7.7.1 Utility—Email Notification—Alert
To Next Page
Loading...
Need help?
General
