10.8.3 PBX Configuration—[2-8-3] System—Ring Tone
Patterns—Call from Others
Different ring tone patterns can be selected for incoming intercom calls and ringing triggered by certain PBX
features (Timed Reminder, Call Back, and Live Call Screening). A maximum of 8 Ring Tone Pattern Tables
can be programmed, and any pattern table can be selected for use by an extension.
For more information on ring tone patterns, see "2.1.3.2 Ring Tone Pattern Selection" in the Feature Guide.
Extension—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming intercom calls.
Value Range
Single, Double, Triple, Option 1, Option 2
Maintenance Console Location
10.8.3 PBX Configuration—[2-8-3] System—Ring Tone Patterns—Call from Others
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 1— Ring
Pattern Table
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 1— Ring
Pattern Table
Timed Reminder—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for Timed Reminder alarms.
Value Range
Single, Double, Triple, Option 1, Option 2
Maintenance Console Location
10.8.3 PBX Configuration—[2-8-3] System—Ring Tone Patterns—Call from Others
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 1—
Ring
Pattern Table
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 1—
Ring
Pattern Table
Call Back—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for callback ringing by Automatic Callback Busy.
Value Range
Single, Double, Triple, S-Double, Option 1, Option 2
514 PC Programming Manual
10.8.3 PBX Configuration—[2-8-3] System—Ring Tone Patterns—Call from Others
To Next Page
Loading...
Need help?
General
