Panasonic KX-NS500 Pc Programming Manual

Channel Seizure Wait Time
Specifies the length of time that the PBX waits before starting to send the seizure signal following the first ring
when sending Caller ID information to an SLT.
Value Range
64 ´ n (n=5–35) ms
Maintenance Console Location
10.10 PBX Configuration—[2-10] System—Extension CID Settings
Feature Guide References
2.19.1 Caller ID
Caller ID Signal Type
Specifies the type of signal modulation to be used when sending Caller ID information to an SLT (reference
only).
Value Range
FSK
Maintenance Console Location
10.10 PBX Configuration—[2-10] System—Extension CID Settings
Feature Guide References
2.19.1 Caller ID
Additional Local Trunk Access Code to Extension Caller ID
Enables the PBX to automatically add a Trunk Access number to the received telephone number when sending
the Caller ID number of an incoming trunk call to an SLT.
Value Range
Disable, Enable
Maintenance Console Location
10.10 PBX Configuration—[2-10] System—Extension CID Settings
Feature Guide References
2.19.1 Caller ID
Send Caller ID Date & Time to Extension
Enables the PBX to send the date and time of an incoming call when sending Caller ID information to an SLT.
546 PC Programming Manual
10.10 PBX Configuration—[2-10] System—Extension CID Settings

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm