Panasonic KX-NS500 Pc Programming Manual

9.11 PBX Configuration—[1-1]
Configuration—Slot—V-IPGW—Shelf Property
Common settings for all of the V-IPGW cards installed in the Virtual Shelf can be programmed.
Main
Gatekeeper Available
Specifies whether to use a gatekeeper.
Value Range
Disable, Enable
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property
RTCP Packet Sending Ability
Specifies whether to enable the PBX to send RTCP packets.
Value Range
Disable, Enable
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property
RTCP Packet Interval
Specifies the length of time until the PBX retries to send RTCP packets when no reply is received.
Value Range
5–60 s
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property
RTP QoS Available
Specifies the type of value to be stored in the ToS field of the packet.
Value Range
ToS, DSCP, HEX
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property
280 PC Programming Manual
9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm