Delayed Ring
Specifies the delayed ringing setting of each member. (Applicable when the call distribution method of the
incoming call distribution group is set to Ring.)
Value Range
Immediate, 1–6 Rings, No Ring
Maintenance Console Location
11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Member
List
Feature Guide References
2.2.2.2 Group Call Distribution
Wrap-up Timer
Specifies the length of time that must pass after completing a call before the member extension can accept
another call.
This timer is used when " Options—Wrap-up Timer based on" is set to "ICD Group Member" in
11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous.
Value Range
10 ´ n (n=0–300) s
Maintenance Console Location
11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Member
List
PC Programming Manual References
11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous—
Options—Wrap-up Timer based on
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 8— Wrap-up
Timer
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 8— Wrap-up
Timer
Feature Guide References
2.2.2.7 Log-in/Log-out
592 PC Programming Manual
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
To Next Page
Loading...
Need help?
General
