10.6.2 PBX Configuration—[2-6-2] System—Numbering
Plan—Quick Dial
Quick Dialling numbers are used to call extensions or outside parties, or access certain features without having
to dial their full numbers. It is possible to register Quick Dialling numbers that overlap with other registered
numbers (refer to "Automatic Rerouting of VoIP Calls to Public Trunks" in the Feature Guide).
For more information on flexible numbering, see "5.5.7 Flexible Numbering/Fixed Numbering" in the Feature
Guide.
Dial
Specifies the Quick Dialling number.
Value Range
1–4000: Max. 8 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick Dial
Feature Guide References
2.6.5 Quick Dialling
4.2.2 Voice over Internet Protocol (VoIP) Network
5.5.7 Flexible Numbering/Fixed Numbering
Phone Number
Specifies the number to be dialled when the corresponding Quick Dialling number is used.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick Dial
Feature Guide References
2.6.5 Quick Dialling
4.2.2 Voice over Internet Protocol (VoIP) Network
5.5.7 Flexible Numbering/Fixed Numbering
PC Programming Manual 489
10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick Dial
To Next Page
Loading...
Need help?
General
