27.1 Network Service—[1] IP Address/Ports
Basic Settings
LAN Setting—DHCP Port Number
Specifies the port number of the DHCP client. This parameter is only available for entering values when Obtain
an IP address automatically is selected.
Value Range
68, 1024–65535
Maintenance Console Location
27.1 Network Service—[1] IP Address/Ports—Basic Settings
LAN Setting—Obtain an IP address automatically/Use the following IP address
Specifies whether to enable the DHCP server to assign IP address information automatically to the mother
board, or to enter the information manually.
Value Range
Obtain an IP address automatically, Use the following IP address
Maintenance Console Location
27.1 Network Service—[1] IP Address/Ports—Basic Settings
Feature Guide References
5.6.6 Dynamic Host Configuration Protocol (DHCP) Assignment
LAN Setting—IP Address
Specifies the IP address of the mother board. This parameter is only available for entering values when Use
the following IP address is selected.
Value Range
1.0.0.1–223.255.255.254
Maintenance Console Location
27.1 Network Service—[1] IP Address/Ports—Basic Settings
LAN Setting—MAC Address
Indicates the MAC address of the mother board (reference only).
Value Range
00:00:00:00:00:00–FF:FF:FF:FF:FF:FF
978 PC Programming Manual
27.1 Network Service—[1] IP Address/Ports
To Next Page
Loading...
Need help?
General
