Panasonic KX-NS500 Pc Programming Manual

Removed Number of Digits
Specifies the number of leading digits of the dialled number to be removed for each priority.
Value Range
0–15
Maintenance Console Location
17.1 PBX Configuration—[9-1] Private Network—TIE Table
Feature Guide References
4.2.1 TIE Line Service
Added Number
Specifies the number to be added to the dialled number in place of the removed digits for each priority.
Value Range
Max. 32 digits (consisting of 0–9, *, #, and P [Pause])
Maintenance Console Location
17.1 PBX Configuration—[9-1] Private Network—TIE Table
Feature Guide References
4.2.1 TIE Line Service
Trunk Group
Specifies the trunk group to be used for TIE line calls for each priority.
Value Range
None, 1–64
Maintenance Console Location
17.1 PBX Configuration—[9-1] Private Network—TIE Table
Feature Guide References
4.2.1 TIE Line Service
Enhanced QSIG
Leading Number
Specifies the leading number for other PBX extension numbers or the PBX code of other PBXs in the TIE line
network.
PC Programming Manual 801
17.1 PBX Configuration—[9-1] Private Network—TIE Table

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm