Panasonic KX-NS500 Pc Programming Manual

7.3.5 Utility—Log—Call Control Log
Collects and displays Logical Partitioning Call Control Log information.
To show the setting change information for the Logical Partitioning feature, press the Condition button.
To show the call restriction status of the Logical Partitioning feature, press the Status button.
Condition
Item
Description
Date The date on which the setting change of the logical partitioning
feature occurred.
Time The time at which the setting change of the logical partitioning feature
occurred.
Information "Logical Partition" is displayed.
Status The new setting status of the following settings is displayed.
9.6 PBX Configuration—[1-1] Configuration—Slot—UM Port
Property—Main— Area ID for logical partition
10.9 PBX Configuration—[2-9] System—System OptionsOption
2— Applying logical partitioning
Status
Item
Description
Date The date on which the call restriction event from the logical
partitioning feature occurred.
Time The time at which the call restriction event from the logical partitioning
feature occurred.
Function The call restriction types are as follows:
– CO call
– CO-CO call
– Conference call
Information The restricted extension number and/or trunk number is displayed.
Status "Restricted (Logical Partitioning)" is displayed.
PC Programming Manual 113
7.3.5 Utility—Log—Call Control Log

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm