12.2.2 PBX Configuration—[4-2-2] Extension—Portable
Station—FWD/DND
For each PS, separate Call Forwarding (FWD) and Do Not Disturb (DND) settings can be programmed for
incoming intercom and trunk calls. Select the desired PS from the Extension Number / Name list.
To copy FWD/DND values from one location to another, click Copy to.
Forward / DND—For external calls
Specifies the FWD/DND setting for external calls.
If Always (All), Busy, No Answer, or Busy / No Answer is selected, the FWD destination field can be set.
Value Range
Always (All), Busy, No Answer, Busy / No Answer, Do Not Disturb, Off
Maintenance Console Location
12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DND
Feature Guide References
2.3.1 Call Forwarding (FWD)/Do Not Disturb (DND)—SUMMARY
Forward / DND—For internal calls
Specifies the FWD/DND setting for internal calls.
If Always (All), Busy, No Answer, or Busy / No Answer is selected, the FWD destination field can be set.
If For both external calls and internal calls is checked, this setting becomes unavailable, and the value set
for external calls is applied to internal calls.
Value Range
Always (All), Busy, No Answer, Busy / No Answer, Do Not Disturb, Off
Maintenance Console Location
12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DND
Feature Guide References
2.3.1 Call Forwarding (FWD)/Do Not Disturb (DND)—SUMMARY
710 PC Programming Manual
12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DND
To Next Page
Loading...
Need help?
General
