Panasonic KX-NS500 Pc Programming Manual

7.8 Utility—Command
7.8.1 Utility—Command—UM Command
System commands can be sent directly to the Unified Messaging system using the Commands dialogue.
This screen can be accessed only in On-line mode.
Follow the steps below to use the Commands dialogue:
1. Enter the desired command, then click RUN. Results from entered commands are displayed.
2. When finished, click Close.
PC Programming Manual 131
7.8.1 Utility—Command—UM Command

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm