Panasonic KX-NS500 Pc Programming Manual

16.3.1 PBX Configuration—[8-3] ARS—Routing Plan Time—Time
Setting
The start times of a maximum of 4 different time blocks can be programmed for each day of the week, for the
selected Routing Plan. Each time block automatically ends when the subsequent block begins.
Time-A–D—Setting
Enables the setting of the start time for each time block.
Value Range
Disable, Enable
Maintenance Console Location
16.3.1 PBX Configuration—[8-3] ARS—Routing Plan Time—Time Setting
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
Time-A–D—Hour, Minute
Specifies the start time for each time block.
Note
Time-A must be the earliest block in the day, and the following blocks must be set in chronological order.
Correct programming example:
Time-A: 8:00
Time-B: 17:00
Time-C: 21:00
Incorrect programming example:
Time-A: 8:00
Time-B: 13:00
Time-C: 11:30
Time-D: 17:00
Value Range
00:00–23:59
Maintenance Console Location
16.3.1 PBX Configuration—[8-3] ARS—Routing Plan Time—Time Setting
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
792 PC Programming Manual
16.3.1 PBX Configuration—[8-3] ARS—Routing Plan Time—Time Setting

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm