Action Yes No
Step 5
Reseat the cable.
Does the problem remain?
Go to step 6. The problem is
solved.
Step 6
Replace the sensor. See
“Sensor (duplex path) with cover
removal” on page 466.
Does the problem remain?
Go to step 7. The problem is
solved.
Step 7
Perform a print test.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
232 paper jams
232 paper jam messages
Error code Description Action
232.03 During a duplex print job, paper fed from the MPF
never reached the sensor (input).
See
“Sensor (input) late-arriving jam (during
duplex print) service check” on page 112.
232.04 During a duplex print job, paper fed from the MPF
cleared the sensor (input) earlier than expected.
See
“Sensor (input) early-leaving jam (during
duplex print) service check” on page 113.
232.05 During a duplex print job, paper fed from the MPF
never cleared the sensor (input).
See
“Sensor (input) late-leaving jam (during
duplex print) service check” on page 114.
232.13 During a duplex print job, paper fed from tray 1
never reached the sensor (input).
See
“Sensor (input) late-arriving jam (during
duplex print) service check” on page 112.
232.14 During a duplex print job, paper fed from tray 1
cleared the sensor (input) earlier than expected.
See
“Sensor (input) early-leaving jam (during
duplex print) service check” on page 113.
232.15 During a duplex print job, paper fed from tray 1
never cleared the sensor (input).
See
“Sensor (input) late-leaving jam (during
duplex print) service check” on page 114.
232.23 During a duplex print job, paper fed from tray 2
never reached the sensor (input).
See
“Sensor (input) late-arriving jam (during
duplex print) service check” on page 112.
232.24 During a duplex print job, paper fed from tray 2
cleared the sensor (input) earlier than expected.
See
“Sensor (input) early-leaving jam (during
duplex print) service check” on page 113.
232.25 During a duplex print job, paper fed from tray 2
never cleared the sensor (input).
See
“Sensor (input) late-leaving jam (during
duplex print) service check” on page 114.
232.33 During a duplex print job, paper fed from tray 3
never reached the sensor (input).
See
“Sensor (input) late-arriving jam (during
duplex print) service check” on page 112.
232.34 During a duplex print job, paper fed from tray 3
cleared the sensor (input) earlier than expected.
See
“Sensor (input) early-leaving jam (during
duplex print) service check” on page 113.
4064
Diagnostics and troubleshooting
111
To Next Page
Loading...
Need help?
General
