Lexmark MS825 Service Manual

Staple, hole punch finisher top cover removal
1 Remove the staple, hole punch
finisher
left cover. See “Staple, hole punch
finisher
left cover removal” on
page 699.
2 Remove the staple, hole punch finisher right cover. See “Staple, hole punch finisher right cover removal”
on page 701.
3 From the right side, remove the two screws (A).
4 From the left side, remove the two screws (B).
5 Remove the cover.
4064
Parts removal
703

Lexmark MS825 Specifications

General

Brand	Lexmark
Model	MS825
Category	Printer
Language	English