Lexmark MS825 Service Manual

169 error messages
Error code Description Action
169.70 The motor (2100‑sheet tray 5 transport) or motor
(2100‑sheet tray 5 elevator) does not turn on.
See
“2100‑sheet tray transport and elevator
drive failure service check” on page 337.
169.71 The motor (2100‑sheet tray 5 transport) or motor
(2100‑sheet tray 5 elevator) does not turn o.
169.72 The motor (2100‑sheet tray 5 transport) or motor
(2100‑sheet tray 5 elevator) speed did not ramp up
to the required level.
169.73 The motor (2100‑sheet tray 5 transport) or motor
(2100‑sheet tray 5 elevator) stalled.
169.74 The motor (2100‑sheet tray 5 transport) or motor
(2100‑sheet tray 5 elevator) ran too slow.
169.75 The motor (2100‑sheet tray 5 transport) or motor
(2100‑sheet tray 5 elevator) ran too fast.
169.76 The motor (2100‑sheet tray 5 transport) or motor
(2100‑sheet tray 5 elevator) ran too long.
169.80 Motor (tray 5 transport) does not turn on. See
“Tray 5 transport motor failure service
check” on page 335.
169.81 Motor (tray 5 transport) does not turn o.
169.82 Motor (tray 5 transport) speed did not ramp up to
the required level.
See
“Tray 5 transport drive failure service
check” on page 336.
169.83 Motor (tray 5 transport) stalled.
169.84 Motor (tray 5 transport) ran too slow.
169.85 Motor (tray 5 transport) ran too fast.
169.86 Motor (tray 5 transport) ran too long.
Optional tray pick drive failure service check
Action Yes No
Step 1
Check the paper path and trays for paper fragments and partially
fed paper.
Is the paper path free of paper fragments and partially fed paper?
Go to step 3. Go to step 2.
Step 2
Remove the paper fragments and partially fed paper.
Does the problem remain?
Go to step 3. The problem is
solved.
Step 3
Make sure that all the trays and tray inserts are properly installed.
Does the problem remain?
Go to step 4. The problem is
solved.
4064
Diagnostics and troubleshooting
324

Lexmark MS825 Specifications

General

Brand	Lexmark
Model	MS825
Category	Printer
Language	English