Error
code
Description Action
442.13 Paper did not reach the bin 1 sensor
(SHPF light array) on time.
See
“Sensor (SHPF light array) jam service check” on
page 287.
442.15 Paper did not clear the bin 1 sensor (SHPF
light array) on time.
442.19 A bin 1 sensor (SHPF light array) error
occurred.
442.23 Paper did not reach the bin 2 sensor
(SHPF light array) on time.
442.25 Paper did not clear the bin 2 sensor (SHPF
light array) on time.
442.29 A bin 2 sensor (SHPF light array) error
occurred.
444.13 The bin 1 hole punch did not reach its
home position on time.
See
“SHPF hole punch drive failure service check” on
page 288.
444.15 The bin 1 hole punch did not clear its
home position on time.
444.19 A bin 1 hole punch homing error occurred.
444.23 The bin 2 hole punch did not reach its
home position on time.
444.25 The bin 2 hole punch did not clear its
home position on time.
444.29 A bin 2 hole punch homing error
occurred.
Sensor (HPU leading edge) hole punch jam service check
Action Yes No
Step 1
Make sure that all the optional bins are properly installed.
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
Clean all the optional bin doors, and then check the paper path
and bins for paper fragments and partially fed paper.
Is the paper path free of paper fragments and partially fed paper?
Go to step 4. Go to step 3.
Step 3
Remove the paper fragments and partially fed paper.
Does the problem remain?
Go to step 4. The problem is
solved.
4064
Diagnostics and troubleshooting
283
To Next Page
Loading...
Need help?
General
