7.1.5 Cylinder liner - grind the lubricating groove
Periodicity
Description
Unscheduled as necessary
Duration for performing preliminary requirements 0.0 man-hours
Duration for performing the procedure 1.0 man-hours
Duration for performing the requirements after job completion 0.0 man-hours
Personnel
Description Specialization QTY
Engine crew Basic 1
Support equipment
Description Part No. CSN QTY
None
Supplies
Description QTY
Oil stone 1
Emery cloth A/R
Spare Parts
Description Part No. CSN QTY
None
SAFETY PRECAUTIONS
WARNING
Before you operate the turning gear, make sure that no personnel are near the flywheel,
or in the engine.
PRELIMINARY OPERATIONS
• The cylinder cover must be removed, refer to section 7.5.1 Cylinder cover - remove
X72DF
AA00-2124-00AAA-655B-A
Maintenance Manual Cylinder liner - grind the lubricating groove
Winterthur Gas & Diesel Ltd.
- 184 - Issue 002 2020-10
To Next Page
General
