12.2.5 Integrated electric balancer - adjust the bearings
Periodicity
Description
Unscheduled
Duration for performing preliminary requirements 0.0 man-hours
Duration for performing the procedure 0.5 man-hours
Duration for performing the requirements after job completion 0.0 man-hours
Personnel
Description Specialization QTY
Engine crew Intermediate AR
Support equipment
Description Part No. CSN QTY
Alignment tools 94705 2
Drill NA 1
Reamer NA 1
Supplies
Description QTY
None
Spare Parts
Description Part No. CSN QTY
None
SAFETY PRECAUTIONS
NOTE: It is recommended that you speak to a service partner (for example WinGD) when you
do this procedure for the first time.
PRELIMINARY OPERATIONS
• The engine must be stopped.
• The bearing covers must be removed.
X72DF
AA00-7758-00AAA-271A-A
Maintenance Manual Integrated electric balancer - adjust the bearings
Winterthur Gas & Diesel Ltd.
- 702 - Issue 002 2020-10
To Next Page
General
