Xerox Phaser 790 User Manual

10/00
4-8
Phaser 790/DocuColor 2006
REP 1.6, REP 1.7
Initial Issue
Repairs and Adjustments
REP 1.6 Right Front Cover Interlock
Parts List on PL 11.2
Removal
WARNING
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Top Cover Assembly (REP 14.4).
3. Remove the Right Cover (REP 14.9).
4. Remove the ESS PWB (REP 1.9).
5. Remove the Controller Chassis (REP 1.11).
6. Remove the Right Front Cover Interlock (Figure 1).
Replacement
NOTE: Ensure that the Right Front Cover Interlock is installed securely.
1. Reinstall the Right Front Cover Interlock in the reverse order of removal.
Figure 1 Removing the Right Front Cover Interlock
REP 1.7 Left Front Cover Interlock
Parts List on PL 11.2
Removal
WARNING
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Top Cover Assembly (REP 14.4).
3. Remove the Xerographics Cartridge (REP 9.1).
4. Remove the Left Inner Cover Assembly (REP 14.5).
5. Remove the Left Front Cover Interlock (Figure 1).
Replacement
CAUTION
Ensure that the harness is correctly routed when Installing the Left Front Cover Interlock.
1. Reinstall the Left Front Cover Interlock in the reverse order of removal.
Figure 1 Removing the Left Front Cover Interlock
1
Disconnect the
connectors
2
Unhook the switch
from the frame
3
Remove the
Right Front
Cover Interlock
1
Disconnect the
connectors at the
interlock (Brown
is on top)
2
Remove the
screw
3
Remove the
Left Front
Cover Interlock

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English