Xerox Phaser 790 User Manual

10/00
5-31
Phaser 790/DocuColor 2006
PL 8.2
Parts List
Initial Issue
PL 8.2 Fusing (2 of 7)
Item Part Description
1 600K85412 Main Fuser Assembly 110v (REP
10.2 ADJ 10.1)
– 600K85422 Main Fuser Assembly 220v (REP
10.2)
2 – Bottom Plate (P/O PL 8.2 Item 1)
3 130E81970 Front Fuser Exit Sensor, Rear
Fuser Exit Sensor (REP 10.8 REP
10.9)
4 – Heater Seal (P/O PL 8.2 Item 1)
5 – Washer (P/O PL 8.2 Item 1)
6 130K60721 Temperature Sensor (REP 10.12)
7 – Fuser Front Frame (P/O PL 8.2
Item 1)
8 – Fuser Rear Frame (P/O PL 8.2
Item 1)
9 – Nip Spring (P/O PL 8.2 Item 1)
10 003E53300 Fuser Nip Handle
11 – Nip Plate (P/O PL 8.2 Item 1)
12 – Nut (P/O PL 8.2 Item 1)
13 038K85073 Lower Guide Assembly (REP 10.7)
14 – Exit Lower Guide (P/O PL 8.2 Item
1)
15 – Actuator Stopper (P/O PL 8.2 Item
1)
16 – Fuser Exit Actuator (P/O PL 8.2
Item 1)
17 – Fuser Exit Spring (P/O PL 8.2 Item
1)
18 – Fuser Rear Cover (P/O PL 8.2 Item
1)
19 – Fuser Front Cover (P/O PL 8.2 Item
1)
20 038K85081 Upper Guide Assembly (REP 10.3)
21 – Upper Guide Sub (P/O PL 8.2 Item
1)
22 059K15021 Pinch Rolls
23 – Seal (P/O PL 8.2 Item 1)
24 600K85430 Upper Plate (REP 10.4)
25 – Heater Wire (P/O PL 8.2 Item 1)
26 – Adjusting Screw (P/O PL 8.2 Item
1)

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English