03/01
6-25
Phaser 790/DocuColor 2006
General Product Specifications, IOT Specifications
General Procedures and Information
General Product Specifications
Product Codes
The product codes are shown in Table 1.
Installation Space Requirements
Figure 1 illustrates the space requirements for adequate ventilation and space needed for
replacing the supplies.
Figure 1 Installation Space Requirements
IOT Specifications
Printer Size and Weight
The following table shows dimensions and weights of the printer and options:
Electrical Specifications
The input line voltage and frequency specifications are as follows:
EME/EMI/Grounding
• Leakage protection
– Double Insulated Construction
• Electrical Noise
– 100 V type (JPN) - VCCI Class 1 compliance
– 120 V type NASG - FCC Part 15 subpart B - Class B (ANSI C63.4/11.4D)
– 220-240 V type (ESG) - EN55022 (CISPR Publication 22) - Class B
Table 1 Product Codes
Product Code
DC 2006 Copier/Printer 110 VAC VF8
DC 2006 Copier/Printer 220 VAC VF9
Phaser 790 110 VAC VF6
Phaser 790 220 VAC VF7
6 inches
(152.4 mm)
26 inches
(660 mm)
36 inches
(914.4 mm)
31.3 inches
(794 mm)
79.3 inches
(2013 mm)
67 inches
(1702 mm)
Table 1
Unit Width Depth Height Weight
Printer 25.5 in. (650 mm) 25.4 in. (646 mm) 21.8 in. (554 mm) 156.6 lb. (71.2 Kg)
Feeder 22 in. (560 mm) 23.7 IN. (602 mm) 11.5 IN. (292 mm) 46.6 lb. (21. 2 Kg.)
Cabinet 22 in. (560 mm 27 in. (686 mm) 18.9 in. (479 mm) 39.6 lb. (18 Kg.)
Table 2 Electrical Specifications
Input Voltage Power Supply Fuser
100 VAC 100 to 120 VAC +/- 10% (90 to 135 VAC)
50 Hz +/- 3 Hz, 60 Hz +/- 3 Hz
100 VAC
120 VAC 100 to 120 VAC +/- 10% (90 to 135 VAC)
50 Hz +/- 3 Hz, 60 Hz +/- 3 Hz
120 VAC
220 VAC 220 to 240 VAC +/- 10% (198 to 264 VAC)
50 Hz +/- 3 Hz, 60 Hz +/- 3 Hz
220 VAC
Table 3 Voltage/Frequency of Operation
Area Power Voltage Frequency (Hz)
NASG 110V ± 10% 60
ESG 220-240V ± 10% 50
To Next Page
Loading...
Need help?
General
