Xerox Phaser 790 User Manual

10/00
4-70
Phaser 790/DocuColor 2006
REP 8.17, REP 8.18
Initial Issue
Repairs and Adjustments
REP 8.17 Registration Clutch
Parts List on PL 4.7
Removal
WARNING
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Bypass Tray/Registration Assembly. (REP 8.6)
3. Remove the Main Paper Handling Assembly. (REP 8.9)
4. Remove the Registration Clutch. (Figure 1)
Figure 1 Removing the Registration Clutch
Replacement
1. Perform the procedure for removal in reverse.
REP 8.18 Registration Rubber Roll
Parts List on PL 4.7
Removal
WARNING
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Bypass Tray/Registration Assembly. (REP 8.6)
3. Remove the Main Paper Handling Assembly. (REP 8.9)
4. Remove the Registration Clutch. (REP 8.17)
5. Remove the Registration Rubber Roll. (Figure 1)
Figure 1 Removing the Registration Rubber Roll
Replacement
1. Perform the procedure for removal in reverse.
1
Disconnect the
connector
2
Remove the E-
ring and remove
the Registration
Clutch
1
Remove the
bearing
2
Remove the E-ring, gear and bearing
3
Remove the Registration
Rubber Roll

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English