10/00
4-52
Phaser 790/DocuColor 2006
REP 6.23
Initial Issue
Repairs and Adjustments
REP 6.23 Control Panel Assembly
Parts List on PL 16.6
Removal
WARNING
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Right Cover (REP 6.2).
3. Remove the Left Cover (REP 6.3).
4. Remove the Control Panel Assembly (Figure 1).
Figure 1 Removing the Control Panel Assembly
Replacement
1. Perform the procedure for removal in reverse.
1
Disconnect the
connector
2
Remove the four screws and
the Control Panel Assembly
by moving it in the direction
indicated
To Next Page
Loading...
Need help?
General
