Xerox Phaser 790 User Manual

10/00
4-136
Phaser 790/DocuColor 2006
REP 11.12, REP 11.13
Initial Issue
Repairs and Adjustments
REP 11.12 Bin Cam Switch
Parts List on PL 19.4
Removal
WARNING
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Rear Cover.
3. Remove the Bin Cam Switch (Figure 1).
Figure 1 Removing the Bin Cam Switch
Replacement
1. Perform the procedure for removal in reverse.
REP 11.13 Bin Home Switch
Parts List on PL 19.4
Removal
WARNING
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Rear Cover.
3. Remove the Bin Home Switch (Figure 1).
Figure 1 Removing the Bin Home Switch
Replacement
1. Perform the procedure for removal in reverse.
1
Disconnect
the wires
2
Remove the
screw and the
Bin Cam Switch
1
Disconnect
the wires
2
Release the locking
tabs and remove the
Bin Home Switch

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English